1980 Custom Built Navigateurs J.E.L. Custom 37" Sailboat for sale in Green Cv Spgs, FL
Offered by: Pop Sells5717 Bessie Drive
Sarasota FL 34233 | (941) 538-7803
Click for other boats for sale at BoatersNet from Pop Sells
Boat Basics
Boat Details
Additional Boat Details
Interior layout
Galley
Electronic Equipment
Electrical System
Other Equipment
Remarks
Stock #441946
Video of this vessel available at www [dot] popsells [dot] com/view/441946
Reason for selling is Quitting Sailing .
This Custom Built has been on the market for more than 30 days (Mar 4th). If you are thinking of making an offer, submit it today and let's make a deal!
Custom Built! Bilge Keel! Extremely Stable Bluewater Sailer!
An experienced island hopper ready to take you on your next great adventure. This is not your usual assembly line, Tupperware boat. This custom-built bluewater sailer, with a bilge keel, is an impressive cruiser even when the weather turns ugly.
This is a cutter rigged boat with an extruded aluminum keel stepped mast and an extruded aluminum boom. There is a Profurl roller furling unit on the headstay and a Facnor LS130 furling unit on the cutter stay.
The sail inventory includes a mainsail, a 100% jib, a staysail, a storm jib, and a gale sail. All are serviceable with slides and bindings intact.
There are six (6) two-speed Lewmar winches and (2) single speed Lewmar winches. All in good working order.
While not under sail, the boat is powered by a naturally aspirated Nanni 50 HP diesel engine driving a Sauer Danfoss hydraulic drive pushing a 1-1/4 stainless steel shaft and a three-bladed bronze 19 x 16 prop. There is also a newer PSS shaft seal.
Ground tackle includes a 40kg Rocna anchor with 150 ft of 3/8 chain, a 45 lb CQR with 150' of 3/4' rode, and an additional emergency anchor. There is also a Lofrans Tigres 1500W electric windlass.
Nav electronics include two VHF radios (1 mounted, 1 handheld), Raymarine C-95 24 mile radar-plotter-depth finder, AIS transponder with GPS, Furuno Nav-500 autopilot (hydraulic drive), DST 800 speedlog, and a Galaxy Aquameter compass.
Electrical systems are charged via the high amp alternator, one 250 watt solar panel and one 100 watt orientable solar panel with a Blue Sky Solar-Boost 3024i controller, and a wind generator.
Electrical storage includes 1 Lifeline 12v GR24 AGM battery (engine), and 4 ROLLS 225 Amp hr AGM 6v (house).
Below, the accommodations include a forward cabin that has a V-berth, aft to port is the enclosed head, and to starboard are storage lockers. Continuing aft there is the main salon with a settee to Port, followed aft by the U-shaped galley. To starboard there is a convertible settee followed aft by the navigation station and then the quarter berth.
Interior finishes include Marine and teak plywood with solid teak trim, and some formica and painted surfaces. The cabin sole is plywood with teak and holly veneer overlay.
The current owner's father had this boat custom built. So, she has been lovingly cared for by the same family her entire life. She is ready to take you and your family on exciting new adventures. Don't miss the opportunity to own this one of a kind - and extremely competent - sailer.
While we will always attempt to provide you with a TRUE representation of every vessel we market, during any purchase from Pop you will be encouraged to schedule an inspection from an independent, accredited surveyor and every purchase WILL ALWAYS BE subject to your satisfaction with the results from your independent survey and your own personal trial run.
We have several more Sea Ray, Chris-Craft, Bayliner, and Carver vessels for sale. If you're in the Jacksonville, Gainesville, Palatka, or Palm Coast areas, please contact us to let us know what you're looking for and we'll get back with you today about any other cutter sailboat options we have locally that may meet your needs.
Selling your vessel has never been easier. Pop Yachts literally sells thousands of vessels every year all over the country. Sell through a broker and make 20% more $ (compared to traditional dealership trade-in)!
You have questions? We have answers. Call us at (941) 538-7803 to discuss this vessel today.
Video of this vessel available at www [dot] popsells [dot] com/view/441946
Reason for selling is Quitting Sailing .
This Custom Built has been on the market for more than 30 days (Mar 4th). If you are thinking of making an offer, submit it today and let's make a deal!
Custom Built! Bilge Keel! Extremely Stable Bluewater Sailer!
An experienced island hopper ready to take you on your next great adventure. This is not your usual assembly line, Tupperware boat. This custom-built bluewater sailer, with a bilge keel, is an impressive cruiser even when the weather turns ugly.
This is a cutter rigged boat with an extruded aluminum keel stepped mast and an extruded aluminum boom. There is a Profurl roller furling unit on the headstay and a Facnor LS130 furling unit on the cutter stay.
The sail inventory includes a mainsail, a 100% jib, a staysail, a storm jib, and a gale sail. All are serviceable with slides and bindings intact.
There are six (6) two-speed Lewmar winches and (2) single speed Lewmar winches. All in good working order.
While not under sail, the boat is powered by a naturally aspirated Nanni 50 HP diesel engine driving a Sauer Danfoss hydraulic drive pushing a 1-1/4 stainless steel shaft and a three-bladed bronze 19 x 16 prop. There is also a newer PSS shaft seal.
Ground tackle includes a 40kg Rocna anchor with 150 ft of 3/8 chain, a 45 lb CQR with 150' of 3/4' rode, and an additional emergency anchor. There is also a Lofrans Tigres 1500W electric windlass.
Nav electronics include two VHF radios (1 mounted, 1 handheld), Raymarine C-95 24 mile radar-plotter-depth finder, AIS transponder with GPS, Furuno Nav-500 autopilot (hydraulic drive), DST 800 speedlog, and a Galaxy Aquameter compass.
Electrical systems are charged via the high amp alternator, one 250 watt solar panel and one 100 watt orientable solar panel with a Blue Sky Solar-Boost 3024i controller, and a wind generator.
Electrical storage includes 1 Lifeline 12v GR24 AGM battery (engine), and 4 ROLLS 225 Amp hr AGM 6v (house).
Below, the accommodations include a forward cabin that has a V-berth, aft to port is the enclosed head, and to starboard are storage lockers. Continuing aft there is the main salon with a settee to Port, followed aft by the U-shaped galley. To starboard there is a convertible settee followed aft by the navigation station and then the quarter berth.
Interior finishes include Marine and teak plywood with solid teak trim, and some formica and painted surfaces. The cabin sole is plywood with teak and holly veneer overlay.
The current owner's father had this boat custom built. So, she has been lovingly cared for by the same family her entire life. She is ready to take you and your family on exciting new adventures. Don't miss the opportunity to own this one of a kind - and extremely competent - sailer.
While we will always attempt to provide you with a TRUE representation of every vessel we market, during any purchase from Pop you will be encouraged to schedule an inspection from an independent, accredited surveyor and every purchase WILL ALWAYS BE subject to your satisfaction with the results from your independent survey and your own personal trial run.
We have several more Sea Ray, Chris-Craft, Bayliner, and Carver vessels for sale. If you're in the Jacksonville, Gainesville, Palatka, or Palm Coast areas, please contact us to let us know what you're looking for and we'll get back with you today about any other cutter sailboat options we have locally that may meet your needs.
Selling your vessel has never been easier. Pop Yachts literally sells thousands of vessels every year all over the country. Sell through a broker and make 20% more $ (compared to traditional dealership trade-in)!
You have questions? We have answers. Call us at (941) 538-7803 to discuss this vessel today.
Copyright © 2025 · All Rights Reserved · BoatersNet, LLC